Click image to view full size image
Here is 4 inch grinding wheel, the grinding wheel is made of high quality aluminum oxide grains. It is specially used for grinding metal, It has an advantage of durability and efficient.
SALI 100x3x16mm grinding wheel with 2 nets | |
Promotion Restriction: |
Not eligible for promotion for promotion |
Arbor Hole size: |
5/8", 16mm |
Abrasive Wheel Diameter: |
4", 100mm |
Series: |
Metal |
Ideally Used With: |
Angle grinder |
Item: |
Cut-off wheel 4"x1/8"x5/8", PK25 |
Packing: |
5pcs each plastic bag; 25pcs each colorful inner box; 300pcs each colorful carton |
Mini order: |
1 carton each style |
100x3x16mm grinding we divide into 2 styles, here we introduce regulation shape as T42.
It is depressed with 2 nets and blue label, the abrasive is black.
Introduction to the safe use of resin grinding wheel products
Product safety tips:
1. After the grinding wheel is installed, it should be idling to check whether there is any abnormality. If the grinding wheel is found to be oscillating, shaking, or vibrating, please find the cause and eliminate it before cutting.
2. The clamping of the work piece must be firm. Under the cutting pressure, the work piece must not be loose or offset.
3. When cutting multiple materials together, they must be clamped with mechanical claws or at least two-track iron wires must be tied and fastened before cutting.
4. It is not allowed to hold the workpiece or step on the workpiece for cutting.
5. Do not use the side of the grinding wheel to polish the workpiece.
6. When using the afterburner to cut, the force must be appropriate, and the afterburner must be fixed tightly and not loose.
7. When cutting, the operator must deviate from the rotating surface of the grinding wheel and wear protective glasses.
http://www.sali-group.com/